AMSOIL Saber™ Professional Synthetic
100:1 Pre-Mix 2-Cycle Oil (ATP)
SABER® Professional Synthetic 2-Stroke Oil
One Oil Covers All Mix Ratios
Designed for pre-mix applications as lean as 100:1 ratios or richer. Improves throttle response and lowers or
eliminates smoke. Minimizes deposit formation and lowers emissions. Performance emphasis on hand-held power
equipment such as chainsaws and lawn/utility equipment.
See Pricing Information or Place an
Package sizes include:
1.5-oz Pillow Pack
1.5-oz. Pillow Packs (case of 48)
3.5-oz. Bottles (case of 12)
8-oz. Bottles (case of 12)
1-Quart Bottles (case of 12)
ISO-L-EGD, API TC
While two-stroke engines are widely used in handheld power equipment due to their high power-to-weight ratio,
equipment owners and operators are faced with exhaust smoke, the task of properly mixing oil and gas for different
equipment manufacturers, and premature wear and engine failure. AMSOIL SABER® Professional Synthetic 2-Stroke Oil
effectively addresses these issues and more. Specially formulated for pre-mix, air-cooled applications, it
withstands high heat and stress to protect engines against wear and harmful deposits. SABER Professional offers
outstanding protection and performance at lean mix ratios referred to as the SABER Ratio™. Using the SABER Ratio
eliminates the need for mixing different ratios for different equipment, while smoke is virtually undetectable.
With AMSOIL SABER Professional, there is no compromise. It saves time and money while delivering the ultimate
convenience and engine protection.
Synthetic 2-Stroke Oil has been providing improved performance and protection in two-stroke engines since 1973.
Trust the extensive experience of AMSOIL, The First in Synthetics®, to do the best job protecting your
SABER Professional has been tested and proven to provide premium protection and performance at 100:1 mix ratios. It
is recommended for any mix ratio up to 100:1. When tested at half the treat rate for conventional oils (100:1 vs.
50:1), SABER Professional easily passed the industry-standard lubricity test. SABER Professional is designed for
hot-operating two-stroke engines, effectively fighting carbon/deposit formation and preventing ring sticking.
SABER Professional's synthetic formulation burns clean, passing the industry-standard smoke test at the standard
rich mix ratio. When mixed at the SABER Ratio, smoke is virtually undetectable. Equipment operators subjected to
smoke and fumes benefit from these low-emission properties.
SABER Professional provides the additional benefit of fuel stabilization to help prevent fuel from deteriorating
during storage and causing poor engine performance. There is no need to add an additional fuel stabilizer when
putting equipment into seasonal storage.
lubricity and cleanliness properties
friction and helps prevent wear, plug fouling, ring sticking and exhaust port blocking
– delivers fewer emissions at 80:1 and 100:1 mix ratios.
Stabilizes fuel for off-season storage
outstanding protection and performance at lean mix ratios
formulation counteracts the damp environments often encountered in two-stroke applications
SABER Professional is specifically designed for handheld pre-mix two-stroke power equipment including, but not
limited to, chainsaws, trimmers, blowers, brush cutters, edgers and shredder vacs.
Use at conventional mix ratios or the SABER® Ratio,™ regardless of the mix ratio specified for the equipment. For
maximum benefit, use the SABER Ratio.
1 U.S. gallon
1 U.S. gallon
1 U.S. gallon
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.
This product is not expected to cause health concerns when used for the intended applications and according to the
recommendations in the Safety Data Sheet (SDS). An SDS is available online at www.amsoil.com or
upon request at (715) 392-7101. Keep Out of Reach of
Saber® Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
Kinematic Viscosity @ 100°C, cSt (ASTM D445)
Kinematic Viscosity @ 40°C, cSt (ASTM D445)
Viscosity Index (ASTM D2270)
Pour Point °C (°F) (ASTM D97)
Flash Point °C (°F) (ASTM D92)
Fire Point °C (°F) (ASTM D92)
AMSOIL 2-Cycle Oil Lineup
HP Marine Synthetic 2-Stroke Oil (HPM)
Saber Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATO)
INTERCEPTOR Synthetic 2-Cycle Oil (AIT)
DOMINATOR Synthetic 2-Cycle Racing Oil (TDR)