AMSOIL Super Shift Racing
ATF
AMSOIL Supershift Racing ATF is formulated for
High Horsepower and High Torque Applications
Allison C-4
Ford Type F
See Pricing Information or Place an
Order
Package sizes include:
1-Quart Bottle
1-Quart Bottles (case of 12)
PRODUCT
DESCRIPTION AMSOIL Synthetic Super Shift®
Racing Transmission Fluid is specifically formulated for
automatic transmissions operating in high horsepower and high
torque conditions. AMSOIL Super Shift® contains top quality
additives selected specifically for racing applications. Its
unmatched transmission friction performance provides high
holding capacity for maximum torque transfer and brake power,
reduced wear and longer clutch plate life. Super Shift®
virtually eliminates slippage, promotes positive clutch
engagement and improves overall shift performance, helping
racers improve on elapsed times.
Wear
Protection AMSOIL Synthetic Super Shift®
Racing Transmission Fluid contains a robust additive system for
extra protection, and its shear stable base oils prevent
viscosity loss throughout its service life. Super Shift®
provides long-term protection against equipment wear, even when
the equipment is frequently subjected to sustained periods of
applied pressure or high horsepower and high torque. Clutches,
bearings and bushings last longer, saving money on transmission
repairs.
Extreme Temperature
Performance
AMSOIL Synthetic Super Shift® Racing Transmission Fluid is
highly effective against heat and wear, reducing transmission
temperature and minimizing or eliminating burned up
transmissions. Its superior oxidative and thermal stability
inhibits the formation of varnish, deposits and sludge so
equipment runs clean. Super Shift® acts as a heat transfer
fluid and by controlling clutch slippage it helps reduce
operating temperatures of hot transmissions by up to 50° F. In
low temperatures, Super Shift® flows readily for dependable
startup and poststartup protection.
Copper Corrosion, Rust and Foam
Inhibition AMSOIL Synthetic Super Shift®
Racing Transmission Fluid protects equipment from copper
corrosion and rust, even during equipment storage. It controls
foaming for reduced component wear and responsive clutch plate
engagements.
RECOMMENDATIONS
AMSOIL Synthetic Super Shift® Racing Transmission Fluid is
recommended for automatic transmissions coupled to high
horsepower, high torque engines. It is also recommended where
heavy loads place a high demand on transmissions. Recommended
where Allison C-4 or Ford Type F is required. Suggested
automatic transmission applications::
- Drag Racing Cars and Trucks
- Monster Trucks
- Stock Cars
- Off Road 4x4 Vehicles
- Street Hot Rods
COMPATIBILITY
AMSOIL Synthetic Super Shift® Racing Transmission Fluid is
fully compatible with other fluids. However, a mixture of
AMSOIL Super Shift® and another oil will decrease performance
and offer a shorter service life than pure AMSOIL Synthetic
Super Shift® Racing Transmission Fluid.
Note: AMSOIL Synthetic Super Shift® Racing Transmission
Fluid is not recommended as a replacement for Ford Mercon, GM
Dexron or Chrysler ATF+ type fluids in passenger vehicle and
truck transmissions as it may cause erratic shift patterns,
chattering or noise. AMSOIL is not responsible for transmission
performance inconsistent with those specifications listed and
where transmissions have been modified from the original
manufacturer’s design.
HEALTH & SAFETY
This product is not expected to cause health concerns when used
for the intended application and according to the
recommendations in the Material Safety Data Sheet (MSDS).
MSDS's are available upon request at 715-392-7101 or
on our
website. Keep Out of Reach of Children.
Don't pollute. Return used oil to collection
centers.
Typical Technical
Properties
revised as of
9/07
|
| AMSOIL Synthetic Supershift Racing
Transmission Fluid (ART) |
| Kinematic Viscosity @ 100° C,
cSt (ASTM D-445) |
7.1 |
| Kinematic Viscosity @ 40° C, cSt
(ASTM D-445) |
41.3 |
| Viscosity Index (ASTM
D-2270) |
133 |
| Flash Point °C (°F) (ASTM
D-92) |
248 (478) |
| Fire Point °C (°F) (ASTM
D-92) |
266 (510) |
| Pour Point °C (°F) (ASTM
D-97) |
-49 (-56) |
Four Ball Wear Test
(ASTM D-4172 B @ 40 kg. 75°C, 1200 rpm, 1 hour),
Scar, mm |
0.35 |

|