|
AMSOIL Engine and Transmission Flush (FLSH)
helps restore fuel economy, increase operating
efficiency and reduce emissions in gasoline and
diesel engines, and automatic transmissions.
Its potent, detergent-based formula cleans
sludge and deposit build-up, promoting lower
operating temperatures and reduced oil
consumption. AMSOIL Engine and Transmission
Flush is safe on parts and can be easily
disposed of with waste oil.
Restores Vehicles to
Like-New
New engines and transmissions run more
efficiently, but over time they gather harmful
deposits that cause power and performance loss.
Stop-and-go driving, prolonged idling, short
trips that do not allow the engine to reach
full operating temperature, towing, the
ingestion of airborne dirt, fuel dilution,
water condensation and oxidized oil all can
promote sludge build-up in motor oil and
transmission fluid. As it settles, sludge clogs
narrow oil passages, restricting oil flow to
vital parts, especially the upper valve train
area.
In transmissions, deposits can form on
clutch plates, causing hesitation and erratic
shifting. Ultimately clutch glazing can set in,
reducing the life of the transmission. Deposits
in engines and transmissions can accelerate
wear, causing power loss and increased fuel
consumption.
• Cleans engines and transmissions for
improved efficiency, fuel economy and lower
emissions
• Prolongs equipment life
• Detergent-based formula more
environmentally friendly
• Compatible with seals and gaskets
• One-treatment results
• Easily disposed of with waste oil
Installing new oil or transmission fluid
into a dirty vehicle may not be enough to
remove deposits and increase efficiency. The
detergents and dispersants in some lubricants
may not be able to handle leftover sludge and
deposits, and the new lubricant soon becomes
unfit for service, accelerating the formation
of even more harmful deposits.
AMSOIL Engine and Transmission Flush
Benefits
Unlike many flush products, AMSOIL Engine and
Transmission Flush features a multi-use
formulation that dissolves and disperses
sludge, varnish and deposits in both engines
and automatic transmissions. Due to its
detergent-based formulation, used AMSOIL FLSH
can be easily disposed of with waste oil,
making it more user-friendly. Its advanced
formula of light base oil technology, powerful
detergents and dispersants provides safe
cleaning action. AMSOIL FLSH is compatible with
both petroleum and synthetic oils, preparing
poorly maintained equipment for installation of
new oil. It represents the first step toward
restoring neglected equipment to top-notch
performance. AMSOIL Engine and Transmission
Flush provides the following benefits in only
one treatment:
Gasoline and Diesel
Engines
• Helps loosen sticky valves and rings,
minimizing blow-by and reducing
emissions
• Helps quiet lifter noise
• Promotes lower operating temperatures
through sludge removal
• Easy disposal
Automatic Transmissions
• Cleans deposits in oil cooler and
ports
• Helps unclog fluid passages
• Cleans deposits and varnish from clutch
plates, helping improve efficiency
• Promotes smoother operation and
transmission life through reduced shift
delay
Applications
AMSOIL Engine and Transmission Flush is
recommended for diesel and gasoline engines,
and automatic transmissions. It is not
recommended for CVT transmissions or
differentials.
Directions for Use
Though it works in one treatment, AMSOIL Engine
and Transmission Flush is safe enough to be
used at every oil change. If using a flushing
machine, follow the manufacturer’s
recommendation. Otherwise, use the following
guidelines:
Engine: Add 16 oz. bottle
of AMSOIL Engine and Transmission Flush to
engine oil fill port. Idle the engine for 10-15
minutes, then immediately drain the oil. Ensure
enough time for the system to completely
drain. Remove and replace the engine oil
filter. Refill engine with new engine oil in
the viscosity grade recommended by the
manufacturer.
Transmission: Engage
emergency brake. Add 16 oz. bottle of AMSOIL
Engine and Transmission Flush to transmission
oil fill port. Idle for 10-15 minutes; shift
through drive and reverse. Do NOT place vehicle
under heavy load. Drain entire transmission and
torque converter of fluid. FILTER MUST BE
CHANGED prior to refilling with new
transmission fluid.
NOTE: It is not recommended
to flush transmissions that do not have a
removable pan or access to the transmission
filter.
|
| (above) Automatic transmission
clutch plates pre-cleanup. Varnish
and glazing is heavy on some of the
plates. |
|
| (above) Automatic transmission
clutch plates after cleanup with
AMSOIL Engine and Transmission
Flush reveal lighter glazing and
varnish. |
|
| (above) Cylinder head
pre-cleanup. Note the sludge
deposits on and around the valve
springs and push rod openings. |
|
| (above) Cylinder head after
cleanup with AMSOIL Engine and
Transmission Flush. The valve
springs and push rod openings are
noticeably cleaner, with fewer
sludge deposits. The manufacturer’s
stamping is more easily seen. |
|